Edmonton's Trusted
Emergency Plumber
Company

You can’t run out of hot water with tankless water heaters – unless, of course, the power supply is off or goes out. However, a tankless water heater can have trouble keeping up with demand if too many things require hot water all at once. For example, if several appliances are operating at the same time (the dishwasher, the laundry machine, etc.), and you go to have a hot shower, you may find that your tankless unit isn’t capable of providing enough hot water. Therefore, it’s important to ensure that you install a tankless water heater that has a large enough capacity to handle your demand for hot water.

There are several common signs that your hot water tank may stop working. Consider calling a water heater services company to take a look at and repair or replace your unit if: 

1. Your unit is getting old. The average water heater will last 8 to 10 years. 
2. Your water smells or is discoloured. For example, if the water looks rusty the unit may be corroding. 
3. You hear loud noises coming from your hot water heater. Loud popping or crackling sounds can mean sediment has built up in the tank.
4. Your tank is leaking or you notice water around the water heater.
5. Your hot water tank no longer provides enough hot water.
6. The water pressure has gone down and is not sufficient.

The amount of time it takes to get hot water from a new water heater depends on the size and type of hot water heater. A properly and professionally installed gas hot water heater will provide hot water most quickly. An average 40-gallon heater will only take about 30 to 40 minutes to provide heat water, while you can expect hot water from a larger tank (80-gallons) in approximately 60 to 70 minutes. Electric hot water tanks, on the other hand, will take a little longer. For an average 40-gallon electric heater it will take about 60 to 80 minutes and for an 80-gallon tank about 2 hours.

On average, sump pumps last about 10 years. As with any other appliance in your home, a sump pump can become damaged and may need to be replaced as it gets older or experiences more use. Unfortunately, unlike other appliances, it isn’t always obvious when a sump pump has reached the end of its life. In fact, this isn’t usually detected until the sump pump should be working but fails to do its job. In order to prevent your sump pump from failing when you need it most, it’s important to contact a professional plumber nearby to provide sump pump services if you notice that there is no water in the sump pit when your pump is running, if you see rust, if there is a musty or dank odour in your basement, if you hear strange noises coming from your sump pump or if the pump is failing to run automatically.

The strongest drain cleaner is an acidic drain cleaner. When you have a clogged drain, it’s always best to try snaking or plunging it first. This method will ensure you do not damage your pipes. If that fails, give a drain cleaning product a try (at your own risk). 

Different types of drain cleaners have different uses. When you have a tough clog – hair, food, grease, soap scum, paper – an acidic drain cleaning product will be your best bet.

Keep in mind that you should never use chemical drain cleaning products in a completely clogged drain. These types of clogs require the product to sit in the drain for an extended period and this can cause damage to your pipes.
If a drain cleaning product doesn’t cut it, plumbing contractors in Edmonton can help. Contact a local, experienced plumber to have your drains unclogged and working like new in no time.

Chemical drain cleaners do work, depending on the type of clog you have and how tough it is. Chemical drain cleaners work by creating a chemical reaction in your pipes.

When using chemical drain cleaners, always make sure to choose the right type of cleaner for the job. Also, make sure you know what kind of pipes you have, and how old they are so you can avoid using any chemical drain cleaner that might damage your pipes. Older pipes can become damaged due to the chemical reaction created by chemical drain cleaners. This can lead to bigger issues, like leaking pipes, and the need for plumbing repair services.

To avoid damage, physical methods are always best. Plunging or snaking a drain will ensure that it is not damaged by chemicals. When in doubt, call a drain cleaning plumber for professional advice and assistance.

The difference between a boiler and a hot water tank has to do with the way in which each uses the hot water that it produces.

Both boilers and hot water tanks take cool water, heat this water and then distribute it throughout a home via pipes. However, the water that is heated by a boiler is distributed throughout the home via pipes, radiators and radiant in-floor systems in order to heat it – to keep the rooms, floors, garage, etc. comfortable and warm.

On the other hand, a hot water tank heats water that is used for cooking and cleaning purposes – for showers, dishwashing, laundry, etc.

Most homeowner’s insurance policies in Canada cover “sudden and accidental” water damage, which includes burst pipes. However, the coverage might not extend to damage resulting from lack of maintenance or negligence. It’s essential to review your policy and speak with your insurance provider to understand the specifics of your coverage.