Expert Furnace Installation in Devon – Reliable, Energy-Efficient, and Affordable Solutions

Need a new heating system and wondering whether it’s better to rent or buy a furnace? Renting a furnace is definitely cheaper initially but is not the right option for every household.

If you rent a furnace, you will pay a monthly fee and the HVAC dealer will be responsible for maintenance and repairs. However, there are some drawbacks. It is likely that over time you will pay at least double what the furnace is worth. And, because you do not own the heating system, it does not add to the value of your home.

If you can afford to buy a new furnace this is the best option. By buying the furnace outright, you won’t pay any interest and may also be able to benefit from manufacturer or government rebates. Owning the furnace will also add to the value of your home.

The size of the furnace you’ll need largely depends on the size of your home. Size recommendations based on square footage are:

1,200 square foot home: 36,000 to 72,000 BTUs
1,500 square foot home: 45,000 to 90,000 BTUs
1,800 square foot home: 54,000 to 108,000 BTUs
2,100 square foot home: 63,000 to 126,000 BTUs
2,400 square foot home: 72,000 to 144,000 BTUs

Other factors that affect the size of the new furnace installation you’ll need include:

• Climate zone (for example, Edmonton is in Climate Zone 5)
• Quality of insulation
• Window thickness
• Ceiling height
• Number of people living in your home
• Preferred temperature
• Size and state of the basement

For more info om furnace shopping, read our full article on “how to choose the right furnace“.

The key to knowing when to replace your furnace versus when to repair it depends on its age and how many more years you can expect it to last. But, rather than humming and hawing about these questions, there is a simple equation you can use to help you decide.

This equation compares the cost of repairing the unit to the cost of replacing it. Here’s the calculation you can use to decide when you should replace your furnace:

“Cost of Repair” x “Age of Unit (in years)” > “Cost to Replace Furnace” = Replace Furnace

Multiply the cost of the furnace repair by the age of the unit. If this number is less than the cost of replacing your gas furnace, then opt for the repairs. If this number is larger, it will be cheaper to replace the furnace.

If you’re living in Alberta, in the St. Albert/Edmonton area, and you’re still unsure, talk to a local heating company. With their expert knowledge about your particular climate, they will be able to help you make a decision as to whether you should repair or replace your furnace.

Unless you’re a trained professional, it’s not a good idea to attempt to install your own furnace. Yes, you’ll save money now but the issues and damage that can occur from an improperly installed furnace can result in costs far beyond what you would have spent to hire professionals to do your install. 

Hiring a professional heating services provider in your area to install, maintain, and repair your furnace is always the best way to go. This will save you time and money in the long run. In addition to properly installing and calibrating your new furnace system, technicians are trained to help you find the perfect size furnace for your home. This will ensure that your furnace is not too big or too small. This, as well as the additional services provided by professional technicians during installation, including the calibration of your thermostat, will result in a highly-efficient furnace that will save you money in energy costs.

It typically takes between four and eight hours to install a new furnace in Edmonton or the surrounding areas. However, install time can vary depending on factors like the age of your home and the condition of its wiring and ductwork. 

No need to worry about spending a long night freezing inside your home during an Albertan winter. A professional furnace company can have your new furnace up and running within a day to keep you and your family comfortable and warm!

When getting free furnace installation quotes in Edmonton area, make sure to ask how long the installation is expected to take. Local furnace companies will have a good idea based on their experience in your area.

A modern, high-efficiency furnace should last approximately ten to fifteen years. This is based on the average lifespan of a furnace so it is possible that yours may last longer or need to be replaced sooner. 

The key to a long-lasting furnace is regular maintenance and upkeep. It’s important to stay on top of minor furnace repairs, tune-ups, and maintenance. Scheduling regular maintenance with a professionals heating company will help to maximize the life of your furnace and minimize the need for major repairs. This is especially true in Alberta, where cold winters can take a toll on your furnace.

A local furnace company will know how to care for your furnace in this climate and what to look for if it is having issues.

There are several steps involved in installing your new furnace. These steps will vary depending on the furnace you choose, your home’s existing furnace system, and any changes you want.

1. Align the new furnace with existing gas lines and ductwork
2. Connect and seal to the ducting system
3. Connect intake and exhaust pipes
4. Connect the gas line
5. Connect the furnace to the electrical supply and thermostat
6. Connect the furnace to a drain hole

At this point, it’s important to check your work, make sure everything is connected properly and there are no gas leaks. 

Please note: these steps are extremely simplified and meant to provide an overview to understand the professional furnace installation process better. It is highly recommended that you have your furnace professionally installed in order to avoid dangerous problems and issues with your new furnace. Having to get furnace repairs on your new unit would not be covered under warranty without professional installation.

Hiring a professional will be more costly initially but will save you money in the long run.

Here’s how long it takes to install a new furnace.

A gas furnace is the most efficient way to heat your home and by far the most popular in Alberta. Gas furnaces are reliable, cost-effective, and efficient and manufacturers are continually improving their efficiency and quietness and introducing new features.

Amana is one of the best brands of furnaces, especially for homes in Alberta. Amana is one of the few furnace brands with a stainless steel heat exchanger and the only with a lifetime replacement warranty. This makes an Amana furnace a reliable option for any household.

We also think that Trane Furnaces are an exceptional option in Alberta. They have been very reliable over the past few years and look to continue that manufacturing trend.

If you’re wondering what is the best brand of furnace for your home, talk to a local heating services provider. Their expertise can help you make the best choice for your climate.