Beaumont's Trusted
Hot Water Tank Installation company

Sump pumps need annual maintenance. Like other appliances in your home, a sump pump should be maintained and serviced on a yearly basis. In some cases, more maintenance may be required. It is important to stay on top of sump pump maintenance in order to prevent a disaster. Oftentimes, homeowners will not notice that their sump pump isn’t working until it’s too late. Suddenly, when the sump pump is required, the homeowner discovers that it isn’t working as it should be. Many professional plumbing contractors provide Service Partner Plans that can help you properly maintain your appliances. An annual maintenance plan like this will ensure that your sump pump is always in top working condition.

Chemical drain cleaners do work, depending on the type of clog you have and how tough it is. Chemical drain cleaners work by creating a chemical reaction in your pipes.

When using chemical drain cleaners, always make sure to choose the right type of cleaner for the job. Also, make sure you know what kind of pipes you have, and how old they are so you can avoid using any chemical drain cleaner that might damage your pipes. Older pipes can become damaged due to the chemical reaction created by chemical drain cleaners. This can lead to bigger issues, like leaking pipes, and the need for plumbing repair services.

To avoid damage, physical methods are always best. Plunging or snaking a drain will ensure that it is not damaged by chemicals. When in doubt, call a drain cleaning plumber for professional advice and assistance.

The amount of time it takes to get hot water from a new water heater depends on the size and type of hot water heater. A properly and professionally installed gas hot water heater will provide hot water most quickly. An average 40-gallon heater will only take about 30 to 40 minutes to provide heat water, while you can expect hot water from a larger tank (80-gallons) in approximately 60 to 70 minutes. Electric hot water tanks, on the other hand, will take a little longer. For an average 40-gallon electric heater it will take about 60 to 80 minutes and for an 80-gallon tank about 2 hours.

Tankless water heaters are the most energy-efficient hot water systems on the market. In fact, tankless water heaters can be approximately 35% – 80% more efficient than traditional hot water tanks. 

Tankless hot water heaters can be powered by electricity or gas. However, gas-powered tankless heaters are more efficient. In addition to being more energy-efficient, tankless water heaters cost less to operate (up to 50% less than traditional hot water tanks) and last longer (up to double the lifetime).

The plumbing professionals at ProSolutions PHAC recommend the following high-efficiency tankless water heater:

• Noritz EZ111 (Gas Powered)

Please note: Although tankless water heaters are the most energy-efficient hot water system, they are not for everyone. Our guide to tankless water heaters can help you decide if a tankless heater is the best option for your home.

Tankless water heaters have many benefits over traditional hot water tanks however, the truth is, a tankless water heater is not worth it for everyone. Any professional plumbing company can tell you that a tankless hot water system is best for homes that don’t often use large amounts of hot water. For example, if you often take baths in a large tub, or you have numerous high-volume shower heads in your shower, then an on-demand hot water system may not be worth it. On the other hand, a tankless hot water heater will save you money over time, you won’t run out of hot water and it will last much longer than a traditional hot water tank. Consult your local tankless water heater plumber and they can help you decide whether a tankless water heater is right for you.

There are several preventive measures you can take:

• Insulate your pipes, especially those in unheated areas like basements, garages, and crawl spaces.
• Keep your home’s thermostat set to a consistent temperature, even at night and when you’re away.
• Allow faucets to drip slightly during extremely cold spells to keep water flowing.
• Open cabinet doors under sinks to allow warm air to circulate around the pipes.

There are several reasons a faucet may drip or leak. Most commonly, a defective part will cause a faucet to drip. However, more serious problems can also be indicated by a dripping faucet. For example, if your plumbing is not properly maintained and regularly cleaned, corrosion can result, leading to leaky pipes and a leaking faucet. In addition, extreme changes in temperature, a shifting foundation, high water pressure, and intrusive tree roots can also cause pipes to leak. In order to fix a dripping faucet, you’ll first need to find the location of the leak. In some cases, the leak may be difficult to find. If the cause of your dripping faucet is not obvious, having a qualified plumber detect and repair the leak is vital, as it could result in costly damage to your home if left unrepaired. If you notice a leak, make sure to contact an emergency plumber in Edmonton as soon as possible to avoid further damage.

Most homeowner’s insurance policies in Canada cover “sudden and accidental” water damage, which includes burst pipes. However, the coverage might not extend to damage resulting from lack of maintenance or negligence. It’s essential to review your policy and speak with your insurance provider to understand the specifics of your coverage.