Spruce Grove's Trusted
Water Heater Services company

Unfortunately, hot water heaters don’t last forever. On average, a traditional hot water heater will last about 8 to 10 years in Leduc. However, as this is based on the average lifespan, your tank may last only 7 years or it could last 11 or more with proper care and maintenance. The lifespan of a unit will depend on several factors including location, the type of water tank, water quality, the quality of installation, and how it is maintained. You can ensure that your hot water heater lasts as long as possible by scheduling regular hot water tank maintenance to ensure that it is in top working condition. Leduc plumbing services companies can help by providing Service Partner Plans and scheduled yearly water heater maintenance.

Tankless water heaters are the most energy-efficient hot water systems on the market. In fact, tankless water heaters can be approximately 35% – 80% more efficient than traditional hot water tanks. 

Tankless hot water heaters can be powered by electricity or gas. However, gas-powered tankless heaters are more efficient. In addition to being more energy-efficient, tankless water heaters cost less to operate (up to 50% less than traditional hot water tanks) and last longer (up to double the lifetime).

The plumbing professionals at ProSolutions PHAC recommend the following high-efficiency tankless water heater:

• Noritz EZ111 (Gas Powered)

Please note: Although tankless water heaters are the most energy-efficient hot water system, they are not for everyone. Our guide to tankless water heaters can help you decide if a tankless heater is the best option for your home.

The amount of time it takes to get hot water from a new water heater depends on the size and type of hot water heater. A properly and professionally installed gas hot water heater will provide hot water most quickly. An average 40-gallon heater will only take about 30 to 40 minutes to provide heat water, while you can expect hot water from a larger tank (80-gallons) in approximately 60 to 70 minutes. Electric hot water tanks, on the other hand, will take a little longer. For an average 40-gallon electric heater it will take about 60 to 80 minutes and for an 80-gallon tank about 2 hours.

You can’t run out of hot water with tankless water heaters – unless, of course, the power supply is off or goes out. However, a tankless water heater can have trouble keeping up with demand if too many things require hot water all at once. For example, if several appliances are operating at the same time (the dishwasher, the laundry machine, etc.), and you go to have a hot shower, you may find that your tankless unit isn’t capable of providing enough hot water. Therefore, it’s important to ensure that you install a tankless water heater that has a large enough capacity to handle your demand for hot water.

The strongest drain cleaner is an acidic drain cleaner. When you have a clogged drain, it’s always best to try snaking or plunging it first. This method will ensure you do not damage your pipes. If that fails, give a drain cleaning product a try (at your own risk). 

Different types of drain cleaners have different uses. When you have a tough clog – hair, food, grease, soap scum, paper – an acidic drain cleaning product will be your best bet.

Keep in mind that you should never use chemical drain cleaning products in a completely clogged drain. These types of clogs require the product to sit in the drain for an extended period and this can cause damage to your pipes.
If a drain cleaning product doesn’t cut it, plumbing contractors in Edmonton can help. Contact a local, experienced plumber to have your drains unclogged and working like new in no time.

The best homemade drain cleaner is baking soda. Baking soda can be used along with vinegar or lemon juice to create a strong and effective homemade drain cleaner that is safe for your home’s pipes.

To unclog your drains using baking soda and vinegar or lemon juice, pour one cup of baking soda then one cup of white vinegar or lemon juice down the drain. Allow this to sit for an hour then pour down a few cups of boiling water. If this doesn’t work the first time, repeat as necessary.

If your homemade drain cleaner isn’t working, call an experienced provider of drain cleaning plumbers near you to take a look. A professional plumber will be able to determine what is causing the clogged drain and how to fix it.

It can cost anywhere from $3,500 to $5,500 to get a water softener installed in your home. This estimate includes the price of the unit as well as installation. The total cost will range depending on several factors including the type of water softener you choose, the softener’s capacity, the size of your home and the difficulty of the installation. In order to avoid unnecessary costs down the road, it’s important that you have your water softener installed by an expert. Water softener installation in Edmonton is ideal, especially if you are constantly having to deal with soap scum and limescale buildup or you want to increase the longevity of your household appliances that use water.

Chemical drain cleaners do work, depending on the type of clog you have and how tough it is. Chemical drain cleaners work by creating a chemical reaction in your pipes.

When using chemical drain cleaners, always make sure to choose the right type of cleaner for the job. Also, make sure you know what kind of pipes you have, and how old they are so you can avoid using any chemical drain cleaner that might damage your pipes. Older pipes can become damaged due to the chemical reaction created by chemical drain cleaners. This can lead to bigger issues, like leaking pipes, and the need for plumbing repair services.

To avoid damage, physical methods are always best. Plunging or snaking a drain will ensure that it is not damaged by chemicals. When in doubt, call a drain cleaning plumber for professional advice and assistance.