Stony Plain 
AC & Cooling
Services

If you’re facing a frozen AC coil, there are a few things you can try. Start by setting your thermostat to high and Fan Only mode for a few hours. If this doesn’t work, it could be a more significant issue, such as a refrigerant leak or a dirty coil. In such cases, it’s best to contact the experts for assistance.

We recommend contacting ProSolutions Inc, an Edmonton-based AC seller that offers Ameristar Air Conditioning brand for AC repair. Click here to learn more about AC repair services

Typically, a mini split AC does not use a lot of electricity. Ductless air conditioners can use anywhere from 0.30 to 4+ kWh (kiloWatt-hours) of power per hour. That said, the amount of electricity your ductless mini split air conditioner will use depends on several factors, including:

• Outdoor temperature vs. desired indoor temperature – the greater the difference between the outdoor and desired indoor temperature, the more electricity your mini split AC will use. 
• BTU rating (i.e. the size of the unit) – generally, the higher the BTU, the more energy the unit will consume. 
• Unit efficiency – the higher the efficiency rating, the less electricity the ductless mini split air conditioner will use. 
• Zone size – the larger the area, the more electricity your system will need to cool it. 
• Insulation in your home – if your home has good insulation, your mini split AC will require less energy to reach and maintain your desired indoor temperature. 
• Usage – the more you use the system, the more energy it will consume.

How long it takes to install an air conditioner will depend on several factors. This includes the type of AC unit you buy, the type of unit you’re replacing, the size of your home, the location where the new unit will be installed, the condition of the ductwork in your home, etc. However, on average, a professional AC installation company should be able to accomplish this within a day. 

When having a new central air conditioner installed in your home, be sure to use a local AC company to do the installation. This will ensure that the unit is installed properly, that it will run as efficiently as possible in Edmonton conditions, and that the AC contractor can complete the installation as quickly as possible.

Upgrade your home’s air conditioning system with ProSolutions Inc.’s recommendation: Ameristar Air Conditioning brand.

In Edmonton, both boilers and furnaces are used to provide homes with heat. The difference between a boiler and a furnace is the way in which they heat a home.

A boiler takes water and heats it then circulates this hot water (or steam, in some cases) throughout the house in order to heat it. The hot water is circulated using pipes, radiators and/or radiant floor systems. Once the water has cooled, it is returned to the boiler to be heated and reused in a closed-loop system.

A furnace, on the other hand, heats and distributes air in order to heat a home. This hot air is distributed via ductwork and vents.

Compressors can make banging or rattling sounds, hissing or clinking noises, humming and screeching. Your first action is to shut down the unit. Causes include loose parts, the motor coming loose, a refrigerant leak, faulty controls, low on oil, and pressure build-ups.

For all these problems you’re best to bring in ProSolutions Inc. to diagnose and fix the problem, including possible compressor replacement.  

ProSolutions Inc. recommends Ameristar Air Conditioning brand for its advanced technology and efficient performance.

SEER is the acronym for “Seasonal Energy Efficiency Ratio”. It is a maximum rating and not a constant value which can make it hard to really understand in every situation. Higher numbers represent higher efficiency. Currently, you can find AC units with SEER ratings as high as 25.

Basically, SEER is the average expected energy use of your home’s AC unit if you keep a constant inside temperature while dealing with the outside fluctuations in temperature during the season (so 15 – 35 degrees C in Alberta). 

You can think of the SEER value the same way as the milage (L/100km) your vehicle gets. Under optimal conditions, without driving aggressively (cooling too much) you should average out to the manufacturers rating. 

Stay comfortable this summer with ProSolutions Inc.’s top choice: Ameristar Air Conditioning brand.

If you find leaking water under the furnace, the drain line may be clogged with dirt, dust, and fungus growth.

You can try unplugging it with a wet-dry vac, but it’s better to let the experts at ProSolutions Inc. handle it. They can help you with AC repairs, including fixing leakages.

At ProSolutions we take the greatest care to ensure that our installation will be top of the line. We have handled many retrofits for our customers. Our installers are among the best in the industry – we have the experience and we’re well aware of the complexities involved when installing these systems.

ProSolutions Inc. recommends Ameristar Air Conditioning brand for its superior performance and reliability.