Devon's Local
Boiler Repair
Company

Need a new heating system and wondering whether it’s better to rent or buy a furnace? Renting a furnace is definitely cheaper initially but is not the right option for every household.

If you rent a furnace, you will pay a monthly fee and the HVAC dealer will be responsible for maintenance and repairs. However, there are some drawbacks. It is likely that over time you will pay at least double what the furnace is worth. And, because you do not own the heating system, it does not add to the value of your home.

If you can afford to buy a new furnace this is the best option. By buying the furnace outright, you won’t pay any interest and may also be able to benefit from manufacturer or government rebates. Owning the furnace will also add to the value of your home.

Yes, there are energy-efficient and eco-friendly furnace options available. Look for ENERGY STAR-certified furnaces that meet strict efficiency and environmental standards. High-efficiency furnaces, often with AFUE (Annual Fuel Utilization Efficiency) ratings of 90% or higher, are also environmentally friendly. They consume less fuel and produce fewer emissions, contributing to reduced carbon footprint and lower energy bills.

Heat pumps, which use electricity to transfer heat rather than burning fuel, are another eco-friendly option. Additionally, consider furnaces with features like variable-speed blowers, which improve efficiency and comfort. Your HVAC professional can help you choose the best option based on your environmental concerns and budget.

The size of the furnace you’ll need largely depends on the size of your home. Size recommendations based on square footage are:

1,200 square foot home: 36,000 to 72,000 BTUs
1,500 square foot home: 45,000 to 90,000 BTUs
1,800 square foot home: 54,000 to 108,000 BTUs
2,100 square foot home: 63,000 to 126,000 BTUs
2,400 square foot home: 72,000 to 144,000 BTUs

Other factors that affect the size of the new furnace installation you’ll need include:

• Climate zone (for example, Edmonton is in Climate Zone 5)
• Quality of insulation
• Window thickness
• Ceiling height
• Number of people living in your home
• Preferred temperature
• Size and state of the basement

For more info om furnace shopping, read our full article on “how to choose the right furnace“.

Boiler heat is not expensive on a day-to-day basis. In fact, you may save in energy costs when heating your house with a boiler compared to a furnace.

However, installing a boiler is typically more complex and therefore more expensive than installing a furnace. On average, a boiler will cost anywhere from $2,500 to $10,000 to purchase and install (depending on the brand and the system’s energy efficiency rating). Plus, your home will need extensive modifications to make a boiler system work – radiant heating must be implemented.

On the other hand, the average cost to buy and install a furnace in Edmonton is only $5,500 to $10,000+. With boiler heat, you will save in the long run but will have to pay more upfront.

Furnace on the fritz? Here are a few things to check if your furnace isn’t working:

• Power switch – is the power on? If so, try turning the furnace off and then on again.
• Furnace filter – check to see if the filter is clogged. If it is, exchange it for a new one. You should be changing your furnace filter ever 3 months.
• Batteries in the thermostat – check the batteries in your thermostat and replace them if they’re low.
• Flame sensor – turn off the power to your furnace (this is an important first step) then remove the sensor and clean it.
• Pilot light – check to make sure the pilot light is on. If it’s out, relight it using your furnace model’s igniting instructions.
• Air intake and exhaust pipes – check the exhaust flue for blockages and clear any blockage you find. For example, during the winter in Alberta, you might find icicles covering the screen of the flue. Remove these to solve the problem.

If one of these is not the issue, you may need a professional to help you uncover and solve the problem. Don’t wait until it’s too late – a broken furnace, especially during an Edmonton winter, can result in broken and burst water pipes! Find a local furnace repair contractor to fix the problem as soon as possible.

Furnace filters should be changed every three months. Regularly changing your filter will ensure the air quality inside your home, as well as the safety and comfort of you and your family. In addition, regularly changing the filter will ensure your furnace doesn’t overheat, resulting in damage or an unexpected breakdown.

Preventative maintenance like this extends the longevity of your furnace and helps reduce maintenance and repair fees.

Not sure how long ago your filter was changed or if it needs to be replaced? A heating services provider can take a look at your filter and let you know if it should be replaced with a new one.

Shopping for a new furnace and wondering what are BTUs? BTU stands for British Thermal Unit – a value traditionally assigned to heat. Technically, a single BTU is the amount of energy that is necessary to increase the temperature of one pound of water by one degree Fahrenheit at sea level. As far as a heating system goes, BTUs refer to the amount of heat that a furnace is able to output.

When it comes to furnaces, the larger the square footage that needs to be heated, the more BTUs you’ll require. For example, it’s suggested that a 1,500 square foot home has a furnace that is able to output 45,000 to 90,000 BTUs.

It shouldn’t take a professional heating company in Edmonton too long to install a new boiler. For a simple boiler replacement, you can expect a trained professional to take between 4 and 6 hours.

Your new boiler will be up and running in less than a day. However, installing a brand new boiler, where one didn’t exist before, is a bigger job. Upgrading your current boiler to a different system or moving your boiler to a new location can also be more involved and will take a bit longer.

Because these jobs are more complex, they may take a team of professionals a few days to complete. Typically, you can expect to wait no more than a week for your new system to be up and ready!