Beaumont's Local
Furnace Tune-Up
Company

There are several steps involved in installing your new furnace. These steps will vary depending on the furnace you choose, your home’s existing furnace system, and any changes you want.

1. Align the new furnace with existing gas lines and ductwork
2. Connect and seal to the ducting system
3. Connect intake and exhaust pipes
4. Connect the gas line
5. Connect the furnace to the electrical supply and thermostat
6. Connect the furnace to a drain hole

At this point, it’s important to check your work, make sure everything is connected properly and there are no gas leaks. 

Please note: these steps are extremely simplified and meant to provide an overview to understand the professional furnace installation process better. It is highly recommended that you have your furnace professionally installed in order to avoid dangerous problems and issues with your new furnace. Having to get furnace repairs on your new unit would not be covered under warranty without professional installation.

Hiring a professional will be more costly initially but will save you money in the long run.

Here’s how long it takes to install a new furnace.

A residential boiler system is used to heat a household. The boiler heats water inside a tank and distributes this hot water (or, in some cases, steam) via pipes, radiators and/or a radiant in-floor system in order to heat the inside of a home. Once the water has cooled and can no longer provide heat, it is sent back to the boiler to be reheated.

Although the name might suggest otherwise, modern-day boilers do not boil water. The term boiler comes from the fact that, in the past, steam boilers were common. Steam boilers boil water in order to create steam for heating purposes. Today, however, most boilers are water heating systems that distribute hot water, rather than steam, in order to heat a house.

The cost of furnace replacement varies depending on factors like the type of furnace, its size, labour costs, and any additional accessories or modifications needed for installation.
On average, you can expect to invest between $5,500 to $10,000+ for a new furnace, including installation. High-efficiency models or complex installations may push the cost higher.

A furnace could stop working for a variety of reasons. Most commonly, furnaces stop working because of:

• Blocked or clogged vents, blowers, and/or ductwork
• A dirty, clogged filter
• Thermostat malfunctions (or just a low battery)
• Problem with your power supply
• Damage to the flue
• Issues with belts
• Problems with the pilot light
• Wiring issues

Winters in Edmonton, Alberta can be cold! Avoid layers upon layers of sweaters – if you’re experiencing any of the following issues, get your furnace repaired right away: 

• Strange smells, like burning or chemicals 
• You can’t turn the furnace on
• Inadequate and inconsistent heat. For example, some rooms are hotter than others and some rooms have no heat at all.
• Loud, banging or rattling noises

If you are in Edmonton and surrounding area, contact ProSolutions Inc, we’d love to be your HVAC company of choice. If you’re outside of our service area, contact a local furnace company with top ratings on Google.

There are several heating systems to choose from, including:

• Gas Furnaces: These are efficient and widely used for their affordability and heating capabilities.
• Electric Furnaces: These are suitable for areas with milder winters but tend to be less energy-efficient.
• Heat Pumps: They can both heat and cool your home, providing year-round comfort.
• Hybrid Systems: Combining a heat pump and a gas furnace for maximum efficiency in different weather conditions.
• Ductless Mini-Splits: Ideal for heating individual rooms or spaces without a central duct system.

Heat pumps do not work in Alberta.

While heat pumps are designed to heat efficiently and cool homes by drawing heat from the outside air during cold months and expelling hot air from inside during warmer months, their effectiveness varies based on the climate.

In milder climates, heat pumps can be an excellent alternative to traditional furnaces and air conditioners. Some homeowners even prefer them for their dual functionality. However, in colder regions like Alberta, especially places like Edmonton, the efficiency of heat pumps diminishes.

The reason? As temperatures drop, heat pumps struggle to extract enough warmth from the frigid air to heat a home adequately. In contrast, traditional furnaces are specifically designed to provide consistent and reliable heat, even in the harshest of winters. For Alberta homeowners, where winters can be particularly brutal, relying solely on a heat pump can be a gamble.

Therefore, while heat pumps might be a viable option in some parts of the world, in Alberta, a traditional furnace remains the trusted and recommended choice for ensuring warmth and comfort throughout the year. There are also other and more reliable heating and cooling solutions available to Alberta homeowners.

If there is a crack in the heat exchanger of your heating system, your furnace could be leaking carbon monoxide (CO). This can be dangerous for you and your family, as CO can cause serious bodily harm and even result in death. Carbon monoxide is a colourless, tasteless, and odourless gas and therefore is not easily detected, especially in small quantities.

Your furnace may be leaking carbon monoxide if you or other members of your household are experiencing any of the following symptoms:

• Headache
• Weakness
• Dizziness
• Nausea or vomiting
• Feeling hungover
• Shortness of breath
• Confusion
• Blurred vision
• Loss of consciousness

If you think your furnace is leaking carbon monoxide contact a local heating company right away. If you think you are experiencing carbon monoxide poisoning, please seek professional medical advice immediately.

The size of the furnace you’ll need largely depends on the size of your home. Size recommendations based on square footage are:

1,200 square foot home: 36,000 to 72,000 BTUs
1,500 square foot home: 45,000 to 90,000 BTUs
1,800 square foot home: 54,000 to 108,000 BTUs
2,100 square foot home: 63,000 to 126,000 BTUs
2,400 square foot home: 72,000 to 144,000 BTUs

Other factors that affect the size of the new furnace installation you’ll need include:

• Climate zone (for example, Edmonton is in Climate Zone 5)
• Quality of insulation
• Window thickness
• Ceiling height
• Number of people living in your home
• Preferred temperature
• Size and state of the basement

For more info om furnace shopping, read our full article on “how to choose the right furnace“.