Beaumont's Local
Garage Heater Install
Company

You should consider replacing your furnace if it’s over 15-20 years old, requires frequent and costly repairs, produces uneven heating, or if your energy bills have been steadily increasing.

It’s also a good idea to upgrade to a more efficient model to save on long-term energy costs.

There are several steps involved in installing your new furnace. These steps will vary depending on the furnace you choose, your home’s existing furnace system, and any changes you want.

1. Align the new furnace with existing gas lines and ductwork
2. Connect and seal to the ducting system
3. Connect intake and exhaust pipes
4. Connect the gas line
5. Connect the furnace to the electrical supply and thermostat
6. Connect the furnace to a drain hole

At this point, it’s important to check your work, make sure everything is connected properly and there are no gas leaks. 

Please note: these steps are extremely simplified and meant to provide an overview to understand the professional furnace installation process better. It is highly recommended that you have your furnace professionally installed in order to avoid dangerous problems and issues with your new furnace. Having to get furnace repairs on your new unit would not be covered under warranty without professional installation.

Hiring a professional will be more costly initially but will save you money in the long run.

Here’s how long it takes to install a new furnace.

The average cost to install a furnace in Edmonton is between $5,500 and $10,000+. The cost depends on various factors, including brand, size, company, etc. However, with the average cost of a new furnace being around $3,000 – $6,000, you can expect to pay anywhere from $5,000 to $10,000 in total, including installation. 

Check out our Current Offers to see how you can save with deals and rebates. 

In Alberta, a heat-loss calculation must be done when installing a new furnace. When hiring a professional to do your install, this will be factored into the price.

Hiring a professional heating company to install your furnace is essential. It may cost more initially but will save you money, time, and headache in the long run.

Furnace filters should be changed every three months. Regularly changing your filter will ensure the air quality inside your home, as well as the safety and comfort of you and your family. In addition, regularly changing the filter will ensure your furnace doesn’t overheat, resulting in damage or an unexpected breakdown.

Preventative maintenance like this extends the longevity of your furnace and helps reduce maintenance and repair fees.

Not sure how long ago your filter was changed or if it needs to be replaced? A heating services provider can take a look at your filter and let you know if it should be replaced with a new one.

A professional technician will have an extensive checklist to go through when providing furnace tune-up service and maintenance. The items on this list cover every part of your furnace in order to ensure that it is in top working condition.

Some of the most important items included in this furnace service checklist are:

• Vent, blower, and ductwork cleaning
• Inspection of the flue for damage and dents
• Examination of all belts and their tension
• Adjustment of the furnace’s pilot light flame
• Calibration of the thermostat
• Visual inspection of all electrical wiring
• Inspection of the furnace filter
• Cleaning and removing any debris

A checklist that includes no less than 22 points of inspection should be used during your furnace service.

Heat pumps do not work in Alberta.

While heat pumps are designed to heat efficiently and cool homes by drawing heat from the outside air during cold months and expelling hot air from inside during warmer months, their effectiveness varies based on the climate.

In milder climates, heat pumps can be an excellent alternative to traditional furnaces and air conditioners. Some homeowners even prefer them for their dual functionality. However, in colder regions like Alberta, especially places like Edmonton, the efficiency of heat pumps diminishes.

The reason? As temperatures drop, heat pumps struggle to extract enough warmth from the frigid air to heat a home adequately. In contrast, traditional furnaces are specifically designed to provide consistent and reliable heat, even in the harshest of winters. For Alberta homeowners, where winters can be particularly brutal, relying solely on a heat pump can be a gamble.

Therefore, while heat pumps might be a viable option in some parts of the world, in Alberta, a traditional furnace remains the trusted and recommended choice for ensuring warmth and comfort throughout the year. There are also other and more reliable heating and cooling solutions available to Alberta homeowners.

A furnace could stop working for a variety of reasons. Most commonly, furnaces stop working because of:

• Blocked or clogged vents, blowers, and/or ductwork
• A dirty, clogged filter
• Thermostat malfunctions (or just a low battery)
• Problem with your power supply
• Damage to the flue
• Issues with belts
• Problems with the pilot light
• Wiring issues

Winters in Edmonton, Alberta can be cold! Avoid layers upon layers of sweaters – if you’re experiencing any of the following issues, get your furnace repaired right away: 

• Strange smells, like burning or chemicals 
• You can’t turn the furnace on
• Inadequate and inconsistent heat. For example, some rooms are hotter than others and some rooms have no heat at all.
• Loud, banging or rattling noises

If you are in Edmonton and surrounding area, contact ProSolutions Inc, we’d love to be your HVAC company of choice. If you’re outside of our service area, contact a local furnace company with top ratings on Google.

It can cost anywhere from $150 to $1,500 to repair a furnace, depending on the issue. If you’re in the Edmonton area, the average cost to repair a furnace will be around $700.

Make sure the furnace company you choose to do your repairs is upfront with their pricing. They should be able to provide you with the price ahead of time so that you know exactly what to expect before moving ahead!

Want to save some money? Often professional heating and plumbing companies will offer a Service Partner Plan – we call ours the ProComfort Plan. This type of plan will help you keep on top of the regular maintenance your furnace needs for a fraction of the price. Regular furnace tune-ups and maintenance will help prevent any major issues, saving you from repairs and replacements that could cost you thousands of dollars! With plans like this, there is often a discount for members, meaning you’ll save money with every visit.