Beaumont's Local
Heater Repair
Company

Furnace on the fritz? Here are a few things to check if your furnace isn’t working:

• Power switch – is the power on? If so, try turning the furnace off and then on again.
• Furnace filter – check to see if the filter is clogged. If it is, exchange it for a new one. You should be changing your furnace filter ever 3 months.
• Batteries in the thermostat – check the batteries in your thermostat and replace them if they’re low.
• Flame sensor – turn off the power to your furnace (this is an important first step) then remove the sensor and clean it.
• Pilot light – check to make sure the pilot light is on. If it’s out, relight it using your furnace model’s igniting instructions.
• Air intake and exhaust pipes – check the exhaust flue for blockages and clear any blockage you find. For example, during the winter in Alberta, you might find icicles covering the screen of the flue. Remove these to solve the problem.

If one of these is not the issue, you may need a professional to help you uncover and solve the problem. Don’t wait until it’s too late – a broken furnace, especially during an Edmonton winter, can result in broken and burst water pipes! Find a local furnace repair contractor to fix the problem as soon as possible.

If there is a crack in the heat exchanger of your heating system, your furnace could be leaking carbon monoxide (CO). This can be dangerous for you and your family, as CO can cause serious bodily harm and even result in death. Carbon monoxide is a colourless, tasteless, and odourless gas and therefore is not easily detected, especially in small quantities.

Your furnace may be leaking carbon monoxide if you or other members of your household are experiencing any of the following symptoms:

• Headache
• Weakness
• Dizziness
• Nausea or vomiting
• Feeling hungover
• Shortness of breath
• Confusion
• Blurred vision
• Loss of consciousness

If you think your furnace is leaking carbon monoxide contact a local heating company right away. If you think you are experiencing carbon monoxide poisoning, please seek professional medical advice immediately.

The average cost to install a furnace in Edmonton is between $5,500 and $10,000+. The cost depends on various factors, including brand, size, company, etc. However, with the average cost of a new furnace being around $3,000 – $6,000, you can expect to pay anywhere from $5,000 to $10,000 in total, including installation. 

Check out our Current Offers to see how you can save with deals and rebates. 

In Alberta, a heat-loss calculation must be done when installing a new furnace. When hiring a professional to do your install, this will be factored into the price.

Hiring a professional heating company to install your furnace is essential. It may cost more initially but will save you money, time, and headache in the long run.

Unless you’re a trained professional, it’s not a good idea to attempt to install your own furnace. Yes, you’ll save money now but the issues and damage that can occur from an improperly installed furnace can result in costs far beyond what you would have spent to hire professionals to do your install. 

Hiring a professional heating services provider in your area to install, maintain, and repair your furnace is always the best way to go. This will save you time and money in the long run. In addition to properly installing and calibrating your new furnace system, technicians are trained to help you find the perfect size furnace for your home. This will ensure that your furnace is not too big or too small. This, as well as the additional services provided by professional technicians during installation, including the calibration of your thermostat, will result in a highly-efficient furnace that will save you money in energy costs.

Furnace filter replacement is important if you’re using your AC. Maybe not as frequently as in winter when monthly changes are best. But check the filter regularly to see that it is functioning properly, and replace when necessary.

If you run your AC during the spring or fall, you will want to check your filter more often since this time of year has more allergens and particulates in the air that can cause you to become sick.

A gas furnace is the most efficient way to heat your home and by far the most popular in Alberta. Gas furnaces are reliable, cost-effective, and efficient and manufacturers are continually improving their efficiency and quietness and introducing new features.

Amana is one of the best brands of furnaces, especially for homes in Alberta. Amana is one of the few furnace brands with a stainless steel heat exchanger and the only with a lifetime replacement warranty. This makes an Amana furnace a reliable option for any household.

We also think that Trane Furnaces are an exceptional option in Alberta. They have been very reliable over the past few years and look to continue that manufacturing trend.

If you’re wondering what is the best brand of furnace for your home, talk to a local heating services provider. Their expertise can help you make the best choice for your climate.

Furnace size is determined by your home’s square footage, insulation, climate, and other factors. It’s best to consult with a professional technician who can perform a load calculation to determine the right size for your specific needs.
Oversized or undersized furnaces can lead to inefficiencies and comfort issues.

A professional technician will have an extensive checklist to go through when providing furnace tune-up service and maintenance. The items on this list cover every part of your furnace in order to ensure that it is in top working condition.

Some of the most important items included in this furnace service checklist are:

• Vent, blower, and ductwork cleaning
• Inspection of the flue for damage and dents
• Examination of all belts and their tension
• Adjustment of the furnace’s pilot light flame
• Calibration of the thermostat
• Visual inspection of all electrical wiring
• Inspection of the furnace filter
• Cleaning and removing any debris

A checklist that includes no less than 22 points of inspection should be used during your furnace service.