Devon's Local
Boiler Installation
Company

If there is a crack in the heat exchanger of your heating system, your furnace could be leaking carbon monoxide (CO). This can be dangerous for you and your family, as CO can cause serious bodily harm and even result in death. Carbon monoxide is a colourless, tasteless, and odourless gas and therefore is not easily detected, especially in small quantities.

Your furnace may be leaking carbon monoxide if you or other members of your household are experiencing any of the following symptoms:

• Headache
• Weakness
• Dizziness
• Nausea or vomiting
• Feeling hungover
• Shortness of breath
• Confusion
• Blurred vision
• Loss of consciousness

If you think your furnace is leaking carbon monoxide contact a local heating company right away. If you think you are experiencing carbon monoxide poisoning, please seek professional medical advice immediately.

If you live in Edmonton or other northern areas your furnace should be professionally serviced once per year. This will prevent you from having to get expensive furnace repairs or replacements and will extend the life of your furnace. In fact, regularly scheduled inspections and service on your heating system can help identify potential breakdowns and reduce emergency repairs by as much as 95%! Regular service can also lower utility bills by up to 30%.

Harsh winters in Edmonton, and other Albertan cities, can take a toll on heating systems. A company that provides furnace service and maintenance will ensure that everything is in top working condition so that you can rely on your furnace all through the winter without having to worry about issues or failures.

Here’s how much furnace tune-ups & servicing costs in Edmonton.

Furnace on the fritz? Here are a few things to check if your furnace isn’t working:

• Power switch – is the power on? If so, try turning the furnace off and then on again.
• Furnace filter – check to see if the filter is clogged. If it is, exchange it for a new one. You should be changing your furnace filter ever 3 months.
• Batteries in the thermostat – check the batteries in your thermostat and replace them if they’re low.
• Flame sensor – turn off the power to your furnace (this is an important first step) then remove the sensor and clean it.
• Pilot light – check to make sure the pilot light is on. If it’s out, relight it using your furnace model’s igniting instructions.
• Air intake and exhaust pipes – check the exhaust flue for blockages and clear any blockage you find. For example, during the winter in Alberta, you might find icicles covering the screen of the flue. Remove these to solve the problem.

If one of these is not the issue, you may need a professional to help you uncover and solve the problem. Don’t wait until it’s too late – a broken furnace, especially during an Edmonton winter, can result in broken and burst water pipes! Find a local furnace repair contractor to fix the problem as soon as possible.

There are several steps involved in installing your new furnace. These steps will vary depending on the furnace you choose, your home’s existing furnace system, and any changes you want.

1. Align the new furnace with existing gas lines and ductwork
2. Connect and seal to the ducting system
3. Connect intake and exhaust pipes
4. Connect the gas line
5. Connect the furnace to the electrical supply and thermostat
6. Connect the furnace to a drain hole

At this point, it’s important to check your work, make sure everything is connected properly and there are no gas leaks. 

Please note: these steps are extremely simplified and meant to provide an overview to understand the professional furnace installation process better. It is highly recommended that you have your furnace professionally installed in order to avoid dangerous problems and issues with your new furnace. Having to get furnace repairs on your new unit would not be covered under warranty without professional installation.

Hiring a professional will be more costly initially but will save you money in the long run.

Here’s how long it takes to install a new furnace.

The cost of servicing your furnace can cost between $150 – $500 per visit, depending on what is being done and the type of furnace you have in your home.

On average, heating and plumbing companies charge a rate of $150 – $300 per hour. However, if you have a membership to a Service Partner Plan, or another annual plan, you can reduce your cost. 

By signing up for a plan with a local furnace company in Edmonton like ProSolutions Plumbing Heating & Air Conditioning, and scheduling regular servicing, you can save money on the services provided and in energy costs. 

As well as the cost savings, regular servicing will help to prevent your system from encountering any unexpected problems – especially important during the long winter months.

Check our Furnace Offers & Coupons section for deals on Furnace Tune-ups & Servicing. We always offer competitive pricing too.

A residential boiler system is used to heat a household. The boiler heats water inside a tank and distributes this hot water (or, in some cases, steam) via pipes, radiators and/or a radiant in-floor system in order to heat the inside of a home. Once the water has cooled and can no longer provide heat, it is sent back to the boiler to be reheated.

Although the name might suggest otherwise, modern-day boilers do not boil water. The term boiler comes from the fact that, in the past, steam boilers were common. Steam boilers boil water in order to create steam for heating purposes. Today, however, most boilers are water heating systems that distribute hot water, rather than steam, in order to heat a house.

Unless you’re a trained professional, it’s not a good idea to attempt to install your own furnace. Yes, you’ll save money now but the issues and damage that can occur from an improperly installed furnace can result in costs far beyond what you would have spent to hire professionals to do your install. 

Hiring a professional heating services provider in your area to install, maintain, and repair your furnace is always the best way to go. This will save you time and money in the long run. In addition to properly installing and calibrating your new furnace system, technicians are trained to help you find the perfect size furnace for your home. This will ensure that your furnace is not too big or too small. This, as well as the additional services provided by professional technicians during installation, including the calibration of your thermostat, will result in a highly-efficient furnace that will save you money in energy costs.

It can cost anywhere from $150 to $1,500 to repair a furnace, depending on the issue. If you’re in the Edmonton area, the average cost to repair a furnace will be around $700.

Make sure the furnace company you choose to do your repairs is upfront with their pricing. They should be able to provide you with the price ahead of time so that you know exactly what to expect before moving ahead!

Want to save some money? Often professional heating and plumbing companies will offer a Service Partner Plan – we call ours the ProComfort Plan. This type of plan will help you keep on top of the regular maintenance your furnace needs for a fraction of the price. Regular furnace tune-ups and maintenance will help prevent any major issues, saving you from repairs and replacements that could cost you thousands of dollars! With plans like this, there is often a discount for members, meaning you’ll save money with every visit.