Devon's Local
Heater Repair
Company

The most energy-efficient furnace is one that is ENERGY STAR certified and has an efficiency rating of 97% or higher. When you see an ENERGY STAR symbol on your appliance, you can be certain that it has been certified as energy efficient. 

When it comes to the type of furnace, gas furnaces are typically the most energy-efficient. Although preferred in some situations, electric and oil furnaces are less efficient. Therefore, gas-powered furnaces are recommended.

The heating professionals at ProSolutions PHAC recommend the following high-efficiency furnaces:

• TRANE S9V2-VS Gas Furnace
• AirEase A97MV High-Efficiency Modulating Gas Furnace
• Goodman GMVM97 Modulating, Variable-Speed Gas Furnace

The cost of servicing your furnace can cost between $150 – $500 per visit, depending on what is being done and the type of furnace you have in your home.

On average, heating and plumbing companies charge a rate of $150 – $300 per hour. However, if you have a membership to a Service Partner Plan, or another annual plan, you can reduce your cost. 

By signing up for a plan with a local furnace company in Edmonton like ProSolutions Plumbing Heating & Air Conditioning, and scheduling regular servicing, you can save money on the services provided and in energy costs. 

As well as the cost savings, regular servicing will help to prevent your system from encountering any unexpected problems – especially important during the long winter months.

Check our Furnace Offers & Coupons section for deals on Furnace Tune-ups & Servicing. We always offer competitive pricing too.

A gas furnace is the most efficient way to heat your home and by far the most popular in Alberta. Gas furnaces are reliable, cost-effective, and efficient and manufacturers are continually improving their efficiency and quietness and introducing new features.

Amana is one of the best brands of furnaces, especially for homes in Alberta. Amana is one of the few furnace brands with a stainless steel heat exchanger and the only with a lifetime replacement warranty. This makes an Amana furnace a reliable option for any household.

We also think that Trane Furnaces are an exceptional option in Alberta. They have been very reliable over the past few years and look to continue that manufacturing trend.

If you’re wondering what is the best brand of furnace for your home, talk to a local heating services provider. Their expertise can help you make the best choice for your climate.

It shouldn’t take a professional heating company in Edmonton too long to install a new boiler. For a simple boiler replacement, you can expect a trained professional to take between 4 and 6 hours.

Your new boiler will be up and running in less than a day. However, installing a brand new boiler, where one didn’t exist before, is a bigger job. Upgrading your current boiler to a different system or moving your boiler to a new location can also be more involved and will take a bit longer.

Because these jobs are more complex, they may take a team of professionals a few days to complete. Typically, you can expect to wait no more than a week for your new system to be up and ready!

The difference between a boiler and a hot water tank has to do with the way in which each uses the hot water that it produces.

Both boilers and hot water tanks take cool water, heat this water and then distribute it throughout a home via pipes. However, the water that is heated by a boiler is distributed throughout the home via pipes, radiators and radiant in-floor systems in order to heat it – to keep the rooms, floors, garage, etc. comfortable and warm.

On the other hand, a hot water tank heats water that is used for cooking and cleaning purposes – for showers, dishwashing, laundry, etc.

Furnace on the fritz? Here are a few things to check if your furnace isn’t working:

• Power switch – is the power on? If so, try turning the furnace off and then on again.
• Furnace filter – check to see if the filter is clogged. If it is, exchange it for a new one. You should be changing your furnace filter ever 3 months.
• Batteries in the thermostat – check the batteries in your thermostat and replace them if they’re low.
• Flame sensor – turn off the power to your furnace (this is an important first step) then remove the sensor and clean it.
• Pilot light – check to make sure the pilot light is on. If it’s out, relight it using your furnace model’s igniting instructions.
• Air intake and exhaust pipes – check the exhaust flue for blockages and clear any blockage you find. For example, during the winter in Alberta, you might find icicles covering the screen of the flue. Remove these to solve the problem.

If one of these is not the issue, you may need a professional to help you uncover and solve the problem. Don’t wait until it’s too late – a broken furnace, especially during an Edmonton winter, can result in broken and burst water pipes! Find a local furnace repair contractor to fix the problem as soon as possible.

Furnace filters should be changed every three months. Regularly changing your filter will ensure the air quality inside your home, as well as the safety and comfort of you and your family. In addition, regularly changing the filter will ensure your furnace doesn’t overheat, resulting in damage or an unexpected breakdown.

Preventative maintenance like this extends the longevity of your furnace and helps reduce maintenance and repair fees.

Not sure how long ago your filter was changed or if it needs to be replaced? A heating services provider can take a look at your filter and let you know if it should be replaced with a new one.

A professional technician will have an extensive checklist to go through when providing furnace tune-up service and maintenance. The items on this list cover every part of your furnace in order to ensure that it is in top working condition.

Some of the most important items included in this furnace service checklist are:

• Vent, blower, and ductwork cleaning
• Inspection of the flue for damage and dents
• Examination of all belts and their tension
• Adjustment of the furnace’s pilot light flame
• Calibration of the thermostat
• Visual inspection of all electrical wiring
• Inspection of the furnace filter
• Cleaning and removing any debris

A checklist that includes no less than 22 points of inspection should be used during your furnace service.