Edmonton's Trusted
Tankless Water Heater Installation company

The amount of time it takes to get hot water from a new water heater depends on the size and type of hot water heater. A properly and professionally installed gas hot water heater will provide hot water most quickly. An average 40-gallon heater will only take about 30 to 40 minutes to provide heat water, while you can expect hot water from a larger tank (80-gallons) in approximately 60 to 70 minutes. Electric hot water tanks, on the other hand, will take a little longer. For an average 40-gallon electric heater it will take about 60 to 80 minutes and for an 80-gallon tank about 2 hours.

Sump pumps need annual maintenance. Like other appliances in your home, a sump pump should be maintained and serviced on a yearly basis. In some cases, more maintenance may be required. It is important to stay on top of sump pump maintenance in order to prevent a disaster. Oftentimes, homeowners will not notice that their sump pump isn’t working until it’s too late. Suddenly, when the sump pump is required, the homeowner discovers that it isn’t working as it should be. Many professional plumbing contractors provide Service Partner Plans that can help you properly maintain your appliances. An annual maintenance plan like this will ensure that your sump pump is always in top working condition.

Most homeowner’s insurance policies in Canada cover “sudden and accidental” water damage, which includes burst pipes. However, the coverage might not extend to damage resulting from lack of maintenance or negligence. It’s essential to review your policy and speak with your insurance provider to understand the specifics of your coverage.

Installing a water softener doesn’t take too long when a professional technician is completing the installation. As long as no unforeseen setbacks or problems are encountered, a professional plumber should be able to install a water softener in about two to three hours. Choosing to have your water softener installed by an expert is a good idea, as this will ensure that it is installed and working properly, helping to prevent problems down the road. In addition, water softeners are available in various makes and models and an experienced technician can help you find the best system for your home and your family.

The best homemade drain cleaner is baking soda. Baking soda can be used along with vinegar or lemon juice to create a strong and effective homemade drain cleaner that is safe for your home’s pipes.

To unclog your drains using baking soda and vinegar or lemon juice, pour one cup of baking soda then one cup of white vinegar or lemon juice down the drain. Allow this to sit for an hour then pour down a few cups of boiling water. If this doesn’t work the first time, repeat as necessary.

If your homemade drain cleaner isn’t working, call an experienced provider of drain cleaning plumbers near you to take a look. A professional plumber will be able to determine what is causing the clogged drain and how to fix it.

A sump pump is an appliance that is used to help prevent flooding in your home. If you’re in a flood zone and your basement floods regularly, if you have older plumbing, or if you just want to take a proactive step against flooding, then a sump pump installation is right for you. Sump pumps help prevent flood damage in your home by detecting increasing water pressure or water levels. If high levels are detected, the sump pump will pump water out of your basement and away from your home to a better location like a storm drain or a well.

It can cost anywhere from $3,500 to $5,500 to get a water softener installed in your home. This estimate includes the price of the unit as well as installation. The total cost will range depending on several factors including the type of water softener you choose, the softener’s capacity, the size of your home and the difficulty of the installation. In order to avoid unnecessary costs down the road, it’s important that you have your water softener installed by an expert. Water softener installation in Edmonton is ideal, especially if you are constantly having to deal with soap scum and limescale buildup or you want to increase the longevity of your household appliances that use water.

In Edmonton, you can expect to pay approximately $3,000 – $7,000 for a new water heater to be installed. This estimate includes the price of a high quality hot water tank, as well as installation. Keep in mind, the cost to have a professional Edmonton plumbing services provider install a water heater in your home will depend on the complexity of the installation, and the hot water tank you choose to purchase. For a simple job in which one hot water tank is being replaced by a new tank of the same type, the labour costs will not be too high. However, if you are having a hot water heater installed in a new location or in a home that does not currently have one, you will be looking at a more difficult job and therefore a higher price.