A residential boiler system is used to heat a household. The boiler heats water inside a tank and distributes this hot water (or, in some cases, steam) via pipes, radiators and/or a radiant in-floor system in order to heat the inside of a home. Once the water has cooled and can no longer provide heat, it is sent back to the boiler to be reheated.
Although the name might suggest otherwise, modern-day boilers do not boil water. The term boiler comes from the fact that, in the past, steam boilers were common. Steam boilers boil water in order to create steam for heating purposes. Today, however, most boilers are water heating systems that distribute hot water, rather than steam, in order to heat a house.
The key to knowing when to replace your furnace versus when to repair it depends on its age and how many more years you can expect it to last. But, rather than humming and hawing about these questions, there is a simple equation you can use to help you decide.
This equation compares the cost of repairing the unit to the cost of replacing it. Here’s the calculation you can use to decide when you should replace your furnace:
“Cost of Repair” x “Age of Unit (in years)” > “Cost to Replace Furnace” = Replace Furnace
Multiply the cost of the furnace repair by the age of the unit. If this number is less than the cost of replacing your gas furnace, then opt for the repairs. If this number is larger, it will be cheaper to replace the furnace.
If you’re living in Alberta, in the St. Albert/Edmonton area, and you’re still unsure, talk to a local heating company. With their expert knowledge about your particular climate, they will be able to help you make a decision as to whether you should repair or replace your furnace.
The average cost to install a furnace in Edmonton is between $5,500 and $10,000+. The cost depends on various factors, including brand, size, company, etc. However, with the average cost of a new furnace being around $3,000 – $6,000, you can expect to pay anywhere from $5,000 to $10,000 in total, including installation.
Check out our Current Offers to see how you can save with deals and rebates.
In Alberta, a heat-loss calculation must be done when installing a new furnace. When hiring a professional to do your install, this will be factored into the price.
Hiring a professional heating company to install your furnace is essential. It may cost more initially but will save you money, time, and headache in the long run.
If there is a crack in the heat exchanger of your heating system, your furnace could be leaking carbon monoxide (CO). This can be dangerous for you and your family, as CO can cause serious bodily harm and even result in death. Carbon monoxide is a colourless, tasteless, and odourless gas and therefore is not easily detected, especially in small quantities.
Your furnace may be leaking carbon monoxide if you or other members of your household are experiencing any of the following symptoms:
If you think your furnace is leaking carbon monoxide contact a local heating company right away. If you think you are experiencing carbon monoxide poisoning, please seek professional medical advice immediately.
Unless you’re a trained professional, it’s not a good idea to attempt to install your own furnace. Yes, you’ll save money now but the issues and damage that can occur from an improperly installed furnace can result in costs far beyond what you would have spent to hire professionals to do your install.
Hiring a professional heating services provider in your area to install, maintain, and repair your furnace is always the best way to go. This will save you time and money in the long run. In addition to properly installing and calibrating your new furnace system, technicians are trained to help you find the perfect size furnace for your home. This will ensure that your furnace is not too big or too small. This, as well as the additional services provided by professional technicians during installation, including the calibration of your thermostat, will result in a highly-efficient furnace that will save you money in energy costs.
The cost of servicing your furnace can cost between $150 – $500 per visit, depending on what is being done and the type of furnace you have in your home.
On average, heating and plumbing companies charge a rate of $150 – $300 per hour. However, if you have a membership to a Service Partner Plan, or another annual plan, you can reduce your cost.
By signing up for a plan with a local furnace company in Edmonton like ProSolutions Plumbing Heating & Air Conditioning, and scheduling regular servicing, you can save money on the services provided and in energy costs.
As well as the cost savings, regular servicing will help to prevent your system from encountering any unexpected problems – especially important during the long winter months.
Check our Furnace Offers & Coupons section for deals on Furnace Tune-ups & Servicing. We always offer competitive pricing too.
Shopping for a new furnace and wondering what are BTUs? BTU stands for British Thermal Unit – a value traditionally assigned to heat. Technically, a single BTU is the amount of energy that is necessary to increase the temperature of one pound of water by one degree Fahrenheit at sea level. As far as a heating system goes, BTUs refer to the amount of heat that a furnace is able to output.
When it comes to furnaces, the larger the square footage that needs to be heated, the more BTUs you’ll require. For example, it’s suggested that a 1,500 square foot home has a furnace that is able to output 45,000 to 90,000 BTUs.
What uses the most electricity (and other forms of energy) in a house is heating and cooling systems, water heating units and other appliances like refrigerators. To reduce the amount of electricity, or energy, being used, ensure that you have energy-efficient appliances installed in your home. The cost of upgrading to a more energy-efficient hot water heater, furnace, AC unit, etc. can be offset with the help of Edmonton’s Home Energy Retrofit Accelerator program. As well, some professional heating and cooling companies in Edmonton, like ProSolutions PHAC, offer extended discounts for installing new, energy-efficient furnaces, water heaters, and more.
As well, regular maintenance can help to keep these home comfort systems running smoothly and efficiently.
Not all plumbing issues require immediate attention. However, there are several common problems that should be addressed as quickly as possible. Issues that count as a plumbing emergency including burst pipes, frozen pipes, clogged toilets, leaky faucets, and no hot water. Although some of these issues can be addressed quickly by the homeowner, others may require the immediate attention of a qualified professional plumber. If you believe you have a plumbing emergency, there are several emergency plumbers in Edmonton that you can contact. When seeking emergency plumbing services, be sure to ask the plumber if you will be paying a premium price for their emergency services. Professional plumbing companies, like ProSolutions Plumbing, Heating & Air Conditioning, will provide upfront pricing and will not charge premium emergency prices.
Boilers can last a really long time. In fact, the average lifespan of a boiler is 10 to 15 years. In order to extend the life of your boiler, it’s important to ensure that it is properly maintained and serviced on a regular basis. Even the best boiler will require maintenance and repairs from time to time.
If your boiler is giving you signs that it needs attention, make sure to hire a professional heating company to do the job. This will ensure your boiler lasts as long as possible. Some signs to keep an eye out for include: low water pressure, no heat coming from your radiators, banging noises, a pilot light that keeps going out or isn’t blue.
There are several steps involved in installing your new furnace. These steps will vary depending on the furnace you choose, your home’s existing furnace system, and any changes you want.
At this point, it’s important to check your work, make sure everything is connected properly and there are no gas leaks.
Please note: these steps are extremely simplified and meant to provide an overview to understand the professional furnace installation process better. It is highly recommended that you have your furnace professionally installed in order to avoid dangerous problems and issues with your new furnace. Having to get furnace repairs on your new unit would not be covered under warranty without professional installation.
Hiring a professional will be more costly initially but will save you money in the long run.
Furnace filter replacement is important if you’re using your AC. Maybe not as frequently as in winter when monthly changes are best. But check the filter regularly to see that it is functioning properly, and replace when necessary.
If you run your AC during the spring or fall, you will want to check your filter more often since this time of year has more allergens and particulates in the air that can cause you to become sick.
