ProSolutions - Plumbing, Heating & Air Conditioning
BBB Accredited Business
2023 Best Plumbing Company in Edmonton
Rated: 4.8 / 5 
Read  100's of Reviews
$97 AC Tune-Up Sale. Save $77.
Rated: 4.8 / 5 
Read 100s of Reviews

FAQ Category: Water Softener

Most homeowner’s insurance policies in Canada cover “sudden and accidental” water damage, which includes burst pipes. However, the coverage might not extend to damage resulting from lack of maintenance or negligence. It’s essential to review your policy and speak with your insurance provider to understand the specifics of your coverage.

The amount of time it takes to get hot water from a new water heater depends on the size and type of hot water heater. A properly and professionally installed gas hot water heater will provide hot water most quickly. An average 40-gallon heater will only take about 30 to 40 minutes to provide heat water, while you can expect hot water from a larger tank (80-gallons) in approximately 60 to 70 minutes. Electric hot water tanks, on the other hand, will take a little longer. For an average 40-gallon electric heater it will take about 60 to 80 minutes and for an 80-gallon tank about 2 hours.

Installing a water softener doesn’t take too long when a professional technician is completing the installation. As long as no unforeseen setbacks or problems are encountered, a professional plumber should be able to install a water softener in about two to three hours. Choosing to have your water softener installed by an expert is a good idea, as this will ensure that it is installed and working properly, helping to prevent problems down the road. In addition, water softeners are available in various makes and models and an experienced technician can help you find the best system for your home and your family.

Tankless water heaters have many benefits over traditional hot water tanks however, the truth is, a tankless water heater is not worth it for everyone. Any professional plumbing company can tell you that a tankless hot water system is best for homes that don’t often use large amounts of hot water. For example, if you often take baths in a large tub, or you have numerous high-volume shower heads in your shower, then an on-demand hot water system may not be worth it. On the other hand, a tankless hot water heater will save you money over time, you won’t run out of hot water and it will last much longer than a traditional hot water tank. Consult your local tankless water heater plumber and they can help you decide whether a tankless water heater is right for you.

The difference between a boiler and a hot water tank has to do with the way in which each uses the hot water that it produces.

Both boilers and hot water tanks take cool water, heat this water and then distribute it throughout a home via pipes. However, the water that is heated by a boiler is distributed throughout the home via pipes, radiators and radiant in-floor systems in order to heat it – to keep the rooms, floors, garage, etc. comfortable and warm.

On the other hand, a hot water tank heats water that is used for cooking and cleaning purposes – for showers, dishwashing, laundry, etc.

There are several common signs that your hot water tank may stop working. Consider calling a water heater services company to take a look at and repair or replace your unit if: 

  1. Your unit is getting old. The average water heater will last 8 to 10 years. 
  2. Your water smells or is discoloured. For example, if the water looks rusty the unit may be corroding. 
  3. You hear loud noises coming from your hot water heater. Loud popping or crackling sounds can mean sediment has built up in the tank.
  4. Your tank is leaking or you notice water around the water heater.
  5. Your hot water tank no longer provides enough hot water.
  6. The water pressure has gone down and is not sufficient.

The average cost to install a furnace in Edmonton is between $5,500 and $10,000+. The cost depends on various factors, including brand, size, company, etc. However, with the average cost of a new furnace being around $3,000 – $6,000, you can expect to pay anywhere from $5,000 to $10,000 in total, including installation. 

Check out our Current Offers to see how you can save with deals and rebates

In Alberta, a heat-loss calculation must be done when installing a new furnace. When hiring a professional to do your install, this will be factored into the price.

Hiring a professional heating company to install your furnace is essential. It may cost more initially but will save you money, time, and headache in the long run.

In Edmonton, you can expect to pay approximately $3,000 – $7,000 for a new water heater to be installed. This estimate includes the price of a high quality hot water tank, as well as installation. Keep in mind, the cost to have a professional Edmonton plumbing services provider install a water heater in your home will depend on the complexity of the installation, and the hot water tank you choose to purchase. For a simple job in which one hot water tank is being replaced by a new tank of the same type, the labour costs will not be too high. However, if you are having a hot water heater installed in a new location or in a home that does not currently have one, you will be looking at a more difficult job and therefore a higher price.

Drain cleaners can be bad for pipes. This is particularly true for chemically costic drain cleaners. 

Chemical drain cleaners create a chemical reaction in your pipes. This results in heat being emitted. It is this heat that can be bad for your pipes. Older and plastic pipes, especially, can be damaged by chemical drain cleaners. If you have plastic pipes and you use a chemical cleaner, the heat may melt the plastic. This can result in leaks and further damage. As well, drain cleaners are not good for septic systems.

To avoid damaging your pipes, try another method of unclogging your pipe first. If you’re unsure, call a professional drain cleaning plumber services provider to help you get the job done right.

A sump pump is an appliance that is used to help prevent flooding in your home. If you’re in a flood zone and your basement floods regularly, if you have older plumbing, or if you just want to take a proactive step against flooding, then a sump pump installation is right for you. Sump pumps help prevent flood damage in your home by detecting increasing water pressure or water levels. If high levels are detected, the sump pump will pump water out of your basement and away from your home to a better location like a storm drain or a well.

Sump pumps need annual maintenance. Like other appliances in your home, a sump pump should be maintained and serviced on a yearly basis. In some cases, more maintenance may be required. It is important to stay on top of sump pump maintenance in order to prevent a disaster. Oftentimes, homeowners will not notice that their sump pump isn’t working until it’s too late. Suddenly, when the sump pump is required, the homeowner discovers that it isn’t working as it should be. Many professional plumbing contractors provide Service Partner Plans that can help you properly maintain your appliances. An annual maintenance plan like this will ensure that your sump pump is always in top working condition.

Yes, at ProSolutions Inc., we stand by the quality of our work. Every service we provide comes with our 5-Star Service Guarantee. Additionally, we offer a Property Protection Guarantee, ensuring that your personal property is safeguarded during our repair process. If any damage occurs, we commit to repairing or replacing it.

1 2 3
Didn't find what you're looking for? Search here.
Generic filters
Exact matches only
Search in title
Search in content
Search in excerpt
Subscribe For Deals
  • This field is for validation purposes and should be left unchanged.
© 2025 Prosolutions Inc.
arrow-right-circle
linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram