Ft. Saskatchewan's Local
Boiler Repair
Company

The key to knowing when to replace your furnace versus when to repair it depends on its age and how many more years you can expect it to last. But, rather than humming and hawing about these questions, there is a simple equation you can use to help you decide.

This equation compares the cost of repairing the unit to the cost of replacing it. Here’s the calculation you can use to decide when you should replace your furnace:

“Cost of Repair” x “Age of Unit (in years)” > “Cost to Replace Furnace” = Replace Furnace

Multiply the cost of the furnace repair by the age of the unit. If this number is less than the cost of replacing your gas furnace, then opt for the repairs. If this number is larger, it will be cheaper to replace the furnace.

If you’re living in Alberta, in the St. Albert/Edmonton area, and you’re still unsure, talk to a local heating company. With their expert knowledge about your particular climate, they will be able to help you make a decision as to whether you should repair or replace your furnace.

Boiler heat is not expensive on a day-to-day basis. In fact, you may save in energy costs when heating your house with a boiler compared to a furnace.

However, installing a boiler is typically more complex and therefore more expensive than installing a furnace. On average, a boiler will cost anywhere from $2,500 to $10,000 to purchase and install (depending on the brand and the system’s energy efficiency rating). Plus, your home will need extensive modifications to make a boiler system work – radiant heating must be implemented.

On the other hand, the average cost to buy and install a furnace in Edmonton is only $5,500 to $10,000+. With boiler heat, you will save in the long run but will have to pay more upfront.

There are several heating systems to choose from, including:

• Gas Furnaces: These are efficient and widely used for their affordability and heating capabilities.
• Electric Furnaces: These are suitable for areas with milder winters but tend to be less energy-efficient.
• Heat Pumps: They can both heat and cool your home, providing year-round comfort.
• Hybrid Systems: Combining a heat pump and a gas furnace for maximum efficiency in different weather conditions.
• Ductless Mini-Splits: Ideal for heating individual rooms or spaces without a central duct system.

It typically takes between four and eight hours to install a new furnace in Edmonton or the surrounding areas. However, install time can vary depending on factors like the age of your home and the condition of its wiring and ductwork. 

No need to worry about spending a long night freezing inside your home during an Albertan winter. A professional furnace company can have your new furnace up and running within a day to keep you and your family comfortable and warm!

When getting free furnace installation quotes in Edmonton area, make sure to ask how long the installation is expected to take. Local furnace companies will have a good idea based on their experience in your area.

Furnace on the fritz? Here are a few things to check if your furnace isn’t working:

• Power switch – is the power on? If so, try turning the furnace off and then on again.
• Furnace filter – check to see if the filter is clogged. If it is, exchange it for a new one. You should be changing your furnace filter ever 3 months.
• Batteries in the thermostat – check the batteries in your thermostat and replace them if they’re low.
• Flame sensor – turn off the power to your furnace (this is an important first step) then remove the sensor and clean it.
• Pilot light – check to make sure the pilot light is on. If it’s out, relight it using your furnace model’s igniting instructions.
• Air intake and exhaust pipes – check the exhaust flue for blockages and clear any blockage you find. For example, during the winter in Alberta, you might find icicles covering the screen of the flue. Remove these to solve the problem.

If one of these is not the issue, you may need a professional to help you uncover and solve the problem. Don’t wait until it’s too late – a broken furnace, especially during an Edmonton winter, can result in broken and burst water pipes! Find a local furnace repair contractor to fix the problem as soon as possible.

The average cost to install a furnace in Edmonton is between $5,500 and $10,000+. The cost depends on various factors, including brand, size, company, etc. However, with the average cost of a new furnace being around $3,000 – $6,000, you can expect to pay anywhere from $5,000 to $10,000 in total, including installation. 

Check out our Current Offers to see how you can save with deals and rebates. 

In Alberta, a heat-loss calculation must be done when installing a new furnace. When hiring a professional to do your install, this will be factored into the price.

Hiring a professional heating company to install your furnace is essential. It may cost more initially but will save you money, time, and headache in the long run.

A residential boiler system is used to heat a household. The boiler heats water inside a tank and distributes this hot water (or, in some cases, steam) via pipes, radiators and/or a radiant in-floor system in order to heat the inside of a home. Once the water has cooled and can no longer provide heat, it is sent back to the boiler to be reheated.

Although the name might suggest otherwise, modern-day boilers do not boil water. The term boiler comes from the fact that, in the past, steam boilers were common. Steam boilers boil water in order to create steam for heating purposes. Today, however, most boilers are water heating systems that distribute hot water, rather than steam, in order to heat a house.

Furnace filters should be changed every three months. Regularly changing your filter will ensure the air quality inside your home, as well as the safety and comfort of you and your family. In addition, regularly changing the filter will ensure your furnace doesn’t overheat, resulting in damage or an unexpected breakdown.

Preventative maintenance like this extends the longevity of your furnace and helps reduce maintenance and repair fees.

Not sure how long ago your filter was changed or if it needs to be replaced? A heating services provider can take a look at your filter and let you know if it should be replaced with a new one.