Leduc's Local
Boiler Installation
Company

Yes, there are energy-efficient and eco-friendly furnace options available. Look for ENERGY STAR-certified furnaces that meet strict efficiency and environmental standards. High-efficiency furnaces, often with AFUE (Annual Fuel Utilization Efficiency) ratings of 90% or higher, are also environmentally friendly. They consume less fuel and produce fewer emissions, contributing to reduced carbon footprint and lower energy bills.

Heat pumps, which use electricity to transfer heat rather than burning fuel, are another eco-friendly option. Additionally, consider furnaces with features like variable-speed blowers, which improve efficiency and comfort. Your HVAC professional can help you choose the best option based on your environmental concerns and budget.

Furnace on the fritz? Here are a few things to check if your furnace isn’t working:

• Power switch – is the power on? If so, try turning the furnace off and then on again.
• Furnace filter – check to see if the filter is clogged. If it is, exchange it for a new one. You should be changing your furnace filter ever 3 months.
• Batteries in the thermostat – check the batteries in your thermostat and replace them if they’re low.
• Flame sensor – turn off the power to your furnace (this is an important first step) then remove the sensor and clean it.
• Pilot light – check to make sure the pilot light is on. If it’s out, relight it using your furnace model’s igniting instructions.
• Air intake and exhaust pipes – check the exhaust flue for blockages and clear any blockage you find. For example, during the winter in Alberta, you might find icicles covering the screen of the flue. Remove these to solve the problem.

If one of these is not the issue, you may need a professional to help you uncover and solve the problem. Don’t wait until it’s too late – a broken furnace, especially during an Edmonton winter, can result in broken and burst water pipes! Find a local furnace repair contractor to fix the problem as soon as possible.

The difference between a boiler and a hot water tank has to do with the way in which each uses the hot water that it produces.

Both boilers and hot water tanks take cool water, heat this water and then distribute it throughout a home via pipes. However, the water that is heated by a boiler is distributed throughout the home via pipes, radiators and radiant in-floor systems in order to heat it – to keep the rooms, floors, garage, etc. comfortable and warm.

On the other hand, a hot water tank heats water that is used for cooking and cleaning purposes – for showers, dishwashing, laundry, etc.

Boiler heat is not expensive on a day-to-day basis. In fact, you may save in energy costs when heating your house with a boiler compared to a furnace.

However, installing a boiler is typically more complex and therefore more expensive than installing a furnace. On average, a boiler will cost anywhere from $2,500 to $10,000 to purchase and install (depending on the brand and the system’s energy efficiency rating). Plus, your home will need extensive modifications to make a boiler system work – radiant heating must be implemented.

On the other hand, the average cost to buy and install a furnace in Edmonton is only $5,500 to $10,000+. With boiler heat, you will save in the long run but will have to pay more upfront.

Furnace filters should be changed every three months. Regularly changing your filter will ensure the air quality inside your home, as well as the safety and comfort of you and your family. In addition, regularly changing the filter will ensure your furnace doesn’t overheat, resulting in damage or an unexpected breakdown.

Preventative maintenance like this extends the longevity of your furnace and helps reduce maintenance and repair fees.

Not sure how long ago your filter was changed or if it needs to be replaced? A heating services provider can take a look at your filter and let you know if it should be replaced with a new one.

There are several steps involved in installing your new furnace. These steps will vary depending on the furnace you choose, your home’s existing furnace system, and any changes you want.

1. Align the new furnace with existing gas lines and ductwork
2. Connect and seal to the ducting system
3. Connect intake and exhaust pipes
4. Connect the gas line
5. Connect the furnace to the electrical supply and thermostat
6. Connect the furnace to a drain hole

At this point, it’s important to check your work, make sure everything is connected properly and there are no gas leaks. 

Please note: these steps are extremely simplified and meant to provide an overview to understand the professional furnace installation process better. It is highly recommended that you have your furnace professionally installed in order to avoid dangerous problems and issues with your new furnace. Having to get furnace repairs on your new unit would not be covered under warranty without professional installation.

Hiring a professional will be more costly initially but will save you money in the long run.

Here’s how long it takes to install a new furnace.

A professional technician will have an extensive checklist to go through when providing furnace tune-up service and maintenance. The items on this list cover every part of your furnace in order to ensure that it is in top working condition.

Some of the most important items included in this furnace service checklist are:

• Vent, blower, and ductwork cleaning
• Inspection of the flue for damage and dents
• Examination of all belts and their tension
• Adjustment of the furnace’s pilot light flame
• Calibration of the thermostat
• Visual inspection of all electrical wiring
• Inspection of the furnace filter
• Cleaning and removing any debris

A checklist that includes no less than 22 points of inspection should be used during your furnace service.

A residential boiler system is used to heat a household. The boiler heats water inside a tank and distributes this hot water (or, in some cases, steam) via pipes, radiators and/or a radiant in-floor system in order to heat the inside of a home. Once the water has cooled and can no longer provide heat, it is sent back to the boiler to be reheated.

Although the name might suggest otherwise, modern-day boilers do not boil water. The term boiler comes from the fact that, in the past, steam boilers were common. Steam boilers boil water in order to create steam for heating purposes. Today, however, most boilers are water heating systems that distribute hot water, rather than steam, in order to heat a house.