Leduc's Local
Boiler Repair
Company

Unless you’re a trained professional, it’s not a good idea to attempt to install your own furnace. Yes, you’ll save money now but the issues and damage that can occur from an improperly installed furnace can result in costs far beyond what you would have spent to hire professionals to do your install. 

Hiring a professional heating services provider in your area to install, maintain, and repair your furnace is always the best way to go. This will save you time and money in the long run. In addition to properly installing and calibrating your new furnace system, technicians are trained to help you find the perfect size furnace for your home. This will ensure that your furnace is not too big or too small. This, as well as the additional services provided by professional technicians during installation, including the calibration of your thermostat, will result in a highly-efficient furnace that will save you money in energy costs.

The key to knowing when to replace your furnace versus when to repair it depends on its age and how many more years you can expect it to last. But, rather than humming and hawing about these questions, there is a simple equation you can use to help you decide.

This equation compares the cost of repairing the unit to the cost of replacing it. Here’s the calculation you can use to decide when you should replace your furnace:

“Cost of Repair” x “Age of Unit (in years)” > “Cost to Replace Furnace” = Replace Furnace

Multiply the cost of the furnace repair by the age of the unit. If this number is less than the cost of replacing your gas furnace, then opt for the repairs. If this number is larger, it will be cheaper to replace the furnace.

If you’re living in Alberta, in the St. Albert/Edmonton area, and you’re still unsure, talk to a local heating company. With their expert knowledge about your particular climate, they will be able to help you make a decision as to whether you should repair or replace your furnace.

Shopping for a new furnace and wondering what are BTUs? BTU stands for British Thermal Unit – a value traditionally assigned to heat. Technically, a single BTU is the amount of energy that is necessary to increase the temperature of one pound of water by one degree Fahrenheit at sea level. As far as a heating system goes, BTUs refer to the amount of heat that a furnace is able to output.

When it comes to furnaces, the larger the square footage that needs to be heated, the more BTUs you’ll require. For example, it’s suggested that a 1,500 square foot home has a furnace that is able to output 45,000 to 90,000 BTUs.

You should consider replacing your furnace if it’s over 15-20 years old, requires frequent and costly repairs, produces uneven heating, or if your energy bills have been steadily increasing.

It’s also a good idea to upgrade to a more efficient model to save on long-term energy costs.

The most energy-efficient furnace is one that is ENERGY STAR certified and has an efficiency rating of 97% or higher. When you see an ENERGY STAR symbol on your appliance, you can be certain that it has been certified as energy efficient. 

When it comes to the type of furnace, gas furnaces are typically the most energy-efficient. Although preferred in some situations, electric and oil furnaces are less efficient. Therefore, gas-powered furnaces are recommended.

The heating professionals at ProSolutions PHAC recommend the following high-efficiency furnaces:

• TRANE S9V2-VS Gas Furnace
• AirEase A97MV High-Efficiency Modulating Gas Furnace
• Goodman GMVM97 Modulating, Variable-Speed Gas Furnace

The difference between a boiler and a hot water tank has to do with the way in which each uses the hot water that it produces.

Both boilers and hot water tanks take cool water, heat this water and then distribute it throughout a home via pipes. However, the water that is heated by a boiler is distributed throughout the home via pipes, radiators and radiant in-floor systems in order to heat it – to keep the rooms, floors, garage, etc. comfortable and warm.

On the other hand, a hot water tank heats water that is used for cooking and cleaning purposes – for showers, dishwashing, laundry, etc.

Need a new heating system and wondering whether it’s better to rent or buy a furnace? Renting a furnace is definitely cheaper initially but is not the right option for every household.

If you rent a furnace, you will pay a monthly fee and the HVAC dealer will be responsible for maintenance and repairs. However, there are some drawbacks. It is likely that over time you will pay at least double what the furnace is worth. And, because you do not own the heating system, it does not add to the value of your home.

If you can afford to buy a new furnace this is the best option. By buying the furnace outright, you won’t pay any interest and may also be able to benefit from manufacturer or government rebates. Owning the furnace will also add to the value of your home.

Boilers can last a really long time. In fact, the average lifespan of a boiler is 10 to 15 years. In order to extend the life of your boiler, it’s important to ensure that it is properly maintained and serviced on a regular basis. Even the best boiler will require maintenance and repairs from time to time.

If your boiler is giving you signs that it needs attention, make sure to hire a professional heating company to do the job. This will ensure your boiler lasts as long as possible. Some signs to keep an eye out for include: low water pressure, no heat coming from your radiators, banging noises, a pilot light that keeps going out or isn’t blue.