Leduc's Local
Heater Repair
Company

If there is a crack in the heat exchanger of your heating system, your furnace could be leaking carbon monoxide (CO). This can be dangerous for you and your family, as CO can cause serious bodily harm and even result in death. Carbon monoxide is a colourless, tasteless, and odourless gas and therefore is not easily detected, especially in small quantities.

Your furnace may be leaking carbon monoxide if you or other members of your household are experiencing any of the following symptoms:

• Headache
• Weakness
• Dizziness
• Nausea or vomiting
• Feeling hungover
• Shortness of breath
• Confusion
• Blurred vision
• Loss of consciousness

If you think your furnace is leaking carbon monoxide contact a local heating company right away. If you think you are experiencing carbon monoxide poisoning, please seek professional medical advice immediately.

Shopping for a new furnace and wondering what are BTUs? BTU stands for British Thermal Unit – a value traditionally assigned to heat. Technically, a single BTU is the amount of energy that is necessary to increase the temperature of one pound of water by one degree Fahrenheit at sea level. As far as a heating system goes, BTUs refer to the amount of heat that a furnace is able to output.

When it comes to furnaces, the larger the square footage that needs to be heated, the more BTUs you’ll require. For example, it’s suggested that a 1,500 square foot home has a furnace that is able to output 45,000 to 90,000 BTUs.

Unless you’re a trained professional, it’s not a good idea to attempt to install your own furnace. Yes, you’ll save money now but the issues and damage that can occur from an improperly installed furnace can result in costs far beyond what you would have spent to hire professionals to do your install. 

Hiring a professional heating services provider in your area to install, maintain, and repair your furnace is always the best way to go. This will save you time and money in the long run. In addition to properly installing and calibrating your new furnace system, technicians are trained to help you find the perfect size furnace for your home. This will ensure that your furnace is not too big or too small. This, as well as the additional services provided by professional technicians during installation, including the calibration of your thermostat, will result in a highly-efficient furnace that will save you money in energy costs.

Furnace size is determined by your home’s square footage, insulation, climate, and other factors. It’s best to consult with a professional technician who can perform a load calculation to determine the right size for your specific needs.
Oversized or undersized furnaces can lead to inefficiencies and comfort issues.

The cost of furnace replacement varies depending on factors like the type of furnace, its size, labour costs, and any additional accessories or modifications needed for installation.
On average, you can expect to invest between $5,500 to $10,000+ for a new furnace, including installation. High-efficiency models or complex installations may push the cost higher.

Boiler heat is not expensive on a day-to-day basis. In fact, you may save in energy costs when heating your house with a boiler compared to a furnace.

However, installing a boiler is typically more complex and therefore more expensive than installing a furnace. On average, a boiler will cost anywhere from $2,500 to $10,000 to purchase and install (depending on the brand and the system’s energy efficiency rating). Plus, your home will need extensive modifications to make a boiler system work – radiant heating must be implemented.

On the other hand, the average cost to buy and install a furnace in Edmonton is only $5,500 to $10,000+. With boiler heat, you will save in the long run but will have to pay more upfront.

Boilers can last a really long time. In fact, the average lifespan of a boiler is 10 to 15 years. In order to extend the life of your boiler, it’s important to ensure that it is properly maintained and serviced on a regular basis. Even the best boiler will require maintenance and repairs from time to time.

If your boiler is giving you signs that it needs attention, make sure to hire a professional heating company to do the job. This will ensure your boiler lasts as long as possible. Some signs to keep an eye out for include: low water pressure, no heat coming from your radiators, banging noises, a pilot light that keeps going out or isn’t blue.

Furnace on the fritz? Here are a few things to check if your furnace isn’t working:

• Power switch – is the power on? If so, try turning the furnace off and then on again.
• Furnace filter – check to see if the filter is clogged. If it is, exchange it for a new one. You should be changing your furnace filter ever 3 months.
• Batteries in the thermostat – check the batteries in your thermostat and replace them if they’re low.
• Flame sensor – turn off the power to your furnace (this is an important first step) then remove the sensor and clean it.
• Pilot light – check to make sure the pilot light is on. If it’s out, relight it using your furnace model’s igniting instructions.
• Air intake and exhaust pipes – check the exhaust flue for blockages and clear any blockage you find. For example, during the winter in Alberta, you might find icicles covering the screen of the flue. Remove these to solve the problem.

If one of these is not the issue, you may need a professional to help you uncover and solve the problem. Don’t wait until it’s too late – a broken furnace, especially during an Edmonton winter, can result in broken and burst water pipes! Find a local furnace repair contractor to fix the problem as soon as possible.