Leduc's Trusted
Emergency Plumber company

The difference between a boiler and a hot water tank has to do with the way in which each uses the hot water that it produces.

Both boilers and hot water tanks take cool water, heat this water and then distribute it throughout a home via pipes. However, the water that is heated by a boiler is distributed throughout the home via pipes, radiators and radiant in-floor systems in order to heat it – to keep the rooms, floors, garage, etc. comfortable and warm.

On the other hand, a hot water tank heats water that is used for cooking and cleaning purposes – for showers, dishwashing, laundry, etc.

Sump pumps need annual maintenance. Like other appliances in your home, a sump pump should be maintained and serviced on a yearly basis. In some cases, more maintenance may be required. It is important to stay on top of sump pump maintenance in order to prevent a disaster. Oftentimes, homeowners will not notice that their sump pump isn’t working until it’s too late. Suddenly, when the sump pump is required, the homeowner discovers that it isn’t working as it should be. Many professional plumbing contractors provide Service Partner Plans that can help you properly maintain your appliances. An annual maintenance plan like this will ensure that your sump pump is always in top working condition.

First, shut off the main water supply to prevent further damage. If the burst pipe is near any electrical outlets or appliances, turn off the electricity at the breaker box. Avoid standing in water to prevent electrical shock. Once you’ve secured the area, call a professional plumbing company to assess and repair the damage.

On average, sump pumps last about 10 years. As with any other appliance in your home, a sump pump can become damaged and may need to be replaced as it gets older or experiences more use. Unfortunately, unlike other appliances, it isn’t always obvious when a sump pump has reached the end of its life. In fact, this isn’t usually detected until the sump pump should be working but fails to do its job. In order to prevent your sump pump from failing when you need it most, it’s important to contact a professional plumber nearby to provide sump pump services if you notice that there is no water in the sump pit when your pump is running, if you see rust, if there is a musty or dank odour in your basement, if you hear strange noises coming from your sump pump or if the pump is failing to run automatically.

A sump pump is an appliance that is used to help prevent flooding in your home. If you’re in a flood zone and your basement floods regularly, if you have older plumbing, or if you just want to take a proactive step against flooding, then a sump pump installation is right for you. Sump pumps help prevent flood damage in your home by detecting increasing water pressure or water levels. If high levels are detected, the sump pump will pump water out of your basement and away from your home to a better location like a storm drain or a well.

There are several common signs that your hot water tank may stop working. Consider calling a water heater services company to take a look at and repair or replace your unit if: 

1. Your unit is getting old. The average water heater will last 8 to 10 years. 
2. Your water smells or is discoloured. For example, if the water looks rusty the unit may be corroding. 
3. You hear loud noises coming from your hot water heater. Loud popping or crackling sounds can mean sediment has built up in the tank.
4. Your tank is leaking or you notice water around the water heater.
5. Your hot water tank no longer provides enough hot water.
6. The water pressure has gone down and is not sufficient.

Water softeners last about 10 to 20 years. The lifetime of your water softener will depend on several factors including the type of water softener and brand you buy, as well as the installation. Proper installation is important to ensure maximum effectiveness and lifetime. One of the many benefits of having a water softener installed in your home is that it will extend the lifetime of your other plumbing appliances. Hard water is tough on appliances like water heaters and laundry machines, as the minerals in the water wear away pipe sealants over time causing leaks and clogs. However, a water softener will remove excessive mineral content from all of the water, helping to protect your plumbing and appliances from unnecessary damage.

In Edmonton, you can expect to pay approximately $3,000 – $7,000 for a new water heater to be installed. This estimate includes the price of a high quality hot water tank, as well as installation. Keep in mind, the cost to have a professional Edmonton plumbing services provider install a water heater in your home will depend on the complexity of the installation, and the hot water tank you choose to purchase. For a simple job in which one hot water tank is being replaced by a new tank of the same type, the labour costs will not be too high. However, if you are having a hot water heater installed in a new location or in a home that does not currently have one, you will be looking at a more difficult job and therefore a higher price.