Sherwood Park's Trusted
Hot Water Tank Repair company

Tankless water heaters have many benefits over traditional hot water tanks however, the truth is, a tankless water heater is not worth it for everyone. Any professional plumbing company can tell you that a tankless hot water system is best for homes that don’t often use large amounts of hot water. For example, if you often take baths in a large tub, or you have numerous high-volume shower heads in your shower, then an on-demand hot water system may not be worth it. On the other hand, a tankless hot water heater will save you money over time, you won’t run out of hot water and it will last much longer than a traditional hot water tank. Consult your local tankless water heater plumber and they can help you decide whether a tankless water heater is right for you.

Installing a water softener doesn’t take too long when a professional technician is completing the installation. As long as no unforeseen setbacks or problems are encountered, a professional plumber should be able to install a water softener in about two to three hours. Choosing to have your water softener installed by an expert is a good idea, as this will ensure that it is installed and working properly, helping to prevent problems down the road. In addition, water softeners are available in various makes and models and an experienced technician can help you find the best system for your home and your family.

First, shut off the main water supply to prevent further damage. If the burst pipe is near any electrical outlets or appliances, turn off the electricity at the breaker box. Avoid standing in water to prevent electrical shock. Once you’ve secured the area, call a professional plumbing company to assess and repair the damage.

In Edmonton, you can expect to pay approximately $3,000 – $7,000 for a new water heater to be installed. This estimate includes the price of a high quality hot water tank, as well as installation. Keep in mind, the cost to have a professional Edmonton plumbing services provider install a water heater in your home will depend on the complexity of the installation, and the hot water tank you choose to purchase. For a simple job in which one hot water tank is being replaced by a new tank of the same type, the labour costs will not be too high. However, if you are having a hot water heater installed in a new location or in a home that does not currently have one, you will be looking at a more difficult job and therefore a higher price.

If your drain is clogged with hair, baking soda can dissolve hair in a drain. 

To try this safe and easy method at home – first, pour a cup of baking soda down the drain. Then pour a cup of vinegar (white vinegar) down. Allow the mixture to sit for several minutes. Keep an eye out for bubbling in the drain (this is caused by the reaction between the baking soda and vinegar). Once the bubbling stops, wait a few more minutes then pour some boiling water down the drain. Repeat until the clog is cleared. Keep at it, it can take a long time.

With a heavy-duty clog, you might need something more powerful. In this case, try snaking the drain, plunging it or calling a local Edmonton drain cleaning company to get the job done.

On average, sump pumps last about 10 years. As with any other appliance in your home, a sump pump can become damaged and may need to be replaced as it gets older or experiences more use. Unfortunately, unlike other appliances, it isn’t always obvious when a sump pump has reached the end of its life. In fact, this isn’t usually detected until the sump pump should be working but fails to do its job. In order to prevent your sump pump from failing when you need it most, it’s important to contact a professional plumber nearby to provide sump pump services if you notice that there is no water in the sump pit when your pump is running, if you see rust, if there is a musty or dank odour in your basement, if you hear strange noises coming from your sump pump or if the pump is failing to run automatically.

The amount of time it takes to get hot water from a new water heater depends on the size and type of hot water heater. A properly and professionally installed gas hot water heater will provide hot water most quickly. An average 40-gallon heater will only take about 30 to 40 minutes to provide heat water, while you can expect hot water from a larger tank (80-gallons) in approximately 60 to 70 minutes. Electric hot water tanks, on the other hand, will take a little longer. For an average 40-gallon electric heater it will take about 60 to 80 minutes and for an 80-gallon tank about 2 hours.

Chemical drain cleaners do work, depending on the type of clog you have and how tough it is. Chemical drain cleaners work by creating a chemical reaction in your pipes.

When using chemical drain cleaners, always make sure to choose the right type of cleaner for the job. Also, make sure you know what kind of pipes you have, and how old they are so you can avoid using any chemical drain cleaner that might damage your pipes. Older pipes can become damaged due to the chemical reaction created by chemical drain cleaners. This can lead to bigger issues, like leaking pipes, and the need for plumbing repair services.

To avoid damage, physical methods are always best. Plunging or snaking a drain will ensure that it is not damaged by chemicals. When in doubt, call a drain cleaning plumber for professional advice and assistance.