Spruce Grove's Trusted
Air Conditioner Repair
Company

In Edmonton, both boilers and furnaces are used to provide homes with heat. The difference between a boiler and a furnace is the way in which they heat a home.

A boiler takes water and heats it then circulates this hot water (or steam, in some cases) throughout the house in order to heat it. The hot water is circulated using pipes, radiators and/or radiant floor systems. Once the water has cooled, it is returned to the boiler to be heated and reused in a closed-loop system.

A furnace, on the other hand, heats and distributes air in order to heat a home. This hot air is distributed via ductwork and vents.

If you are experiencing blown fuses from your AC unit. It’s often an electrical issue with the breaker or the house wiring. Likely a short circuit or some type of a fault to ground issue. It could also be that a dirty filter is the culprit. One not uncommon answer is to check the electrical box in the condensing unit. It’s not surprising in a place like Edmonton, that mice have built a nest in this box and have also nibbled at some of the electrical wires. If you’re like many of us, you’d want an expert like ProSolutions Inc. to fix it.

If your furnace blower is not working, there could be a couple of issues here, one more serious than the other. Firstly, it is important to understand how a furnace works. You can begin to understand this through a very simple principle. A furnace uses some type of fuel (i.e. electrical, oil, gas, etc) to heat a series of coils.  What type of fuel your furnace uses for this combustion.  This series of heated coils (called a heat exchanger) has a fan (called a blower motor) which blows your houses’ air over them and into your air ducts where it is dispersed throughout your house.  This simple process, regardless of what type of fuel you use, is how your furnace is able to blow warm air into your home.

If you’re having any issues with your furnace blower not working. It can come down to the blower motor in the furnace may need replacing and that’s usually a job for the experts. A capacitor. If the capacitor is defective, the fan motor might be noisy, overheat, or not run at all. If the control board is defective, it might not send voltage to the blower motor. If the furnace is not getting power, check the furnace circuit breaker or fuse as this might also be an issue.

On the other hand, the unit may be clogged with dirt and dust and you may be able to fix that yourself but may likely need special attention to unclog the debris and dirt from the components.

In the end, there are several things that can lead to a furnace not blowing air.  If you decide to try and repair an older unit and it requires more effort and costs incurred. It may just be more advantageous to replace it.

If you need help with your furnace issues, give us a call today!

AC parts break down over time. However, an improperly maintained central air conditioning system will put pressure on every part of that system. A dirty filter that hasn’t been replaced, fans that are not cleaned, leaking refrigerant, exposed wires in the electrical box, ice build up on coils. These put pressure on the capacitors, sensors that track heat levels and thermostat readings and generally weaken the unit so it does not run efficiently and any part can break down.

Upgrade your air conditioning game with ProSolutions Inc.’s top pick: Ameristar Air Conditioning brand.

If you find leaking water under the furnace, the drain line may be clogged with dirt, dust, and fungus growth.

You can try unplugging it with a wet-dry vac, but it’s better to let the experts at ProSolutions Inc. handle it. They can help you with AC repairs, including fixing leakages.

If you’re facing a frozen AC coil, there are a few things you can try. Start by setting your thermostat to high and Fan Only mode for a few hours. If this doesn’t work, it could be a more significant issue, such as a refrigerant leak or a dirty coil. In such cases, it’s best to contact the experts for assistance.

We recommend contacting ProSolutions Inc, an Edmonton-based AC seller that offers Ameristar Air Conditioning brand for AC repair. Click here to learn more about AC repair services

Reasons your AC unit won’t run at all, sounds like an electrical problem. A fuse may have blown or circuit breaker tripped. If resetting those doesn’t solve the problem there may be an issue with the unit’s circuit board. In which case check with ProSolutions Inc. to give you a diagnosis.

Trust ProSolutions Inc.’s expertise and choose Ameristar Air Conditioning brand for a comfortable summer.

There are several possible reasons. The usual ones relate to a frozen evaporator coil, dirty filter, dirty condenser coils, a leak somewhere in the refrigeration system or possibly in the ductwork system. It could also be that your unit is older and simply not able to keep up with the extra heavy cooling demands with our weather changes these days. ProSolutions Inc. can check this for you, identify the issue, and advise you on the best actions to take.